M6026 Master of Occupational and Environmental Health
Faculty of Medicine, Nursing and Health Sciences
Master of Occupational and Environmental Health (M6026) is a 1.5 years full-time, 72-credit-point, master's degree (coursework) course from the Faculty of Medicine, Nursing and Health Sciences, taught at Alfred Hospital. Map your units semester by semester with the MonMap planner.
- Credit points
- 72
- Duration
- 1.5 years full time
- 3 years part time
- Campus
- Alfred Hospital
- Multi-modal, On campus
This is the 2024 handbook entry. See the 2027 entry.
Reviews
No reviews yetNo reviews yet. Be the first to review M6026.
Requisite map
Overview
This course equips workplace professionals with the skills and knowledge in quality-level occupational health and safety services in order to identify, prevent and manage occupational and environmental health risks and related health problems. You will learn to systematically control related hazards and exposures within a broad range of workplace and community environments. The course aims to enable you to take responsibility for high-level independent judgements and initiate, implement and evaluate risk management interventions within varied occupational and environmental contexts. It is particularly suitable for medical practitioners, nurses, allied health personnel, scientists and occupational health and safety managers. The course is offered by off-campus learning, however compulsory block attendance is required each semester.
IMPORTANT: This course is only available to international students in ‘on-campus’ mode. Please note that ‘on-campus’ mode comprises a mix of online learning and on-site teaching.
For most units, the majority of contact hours are facilitated through the University’s online learning platform, with additional face-to-face contact during designated study days at Public Health & Preventive Medicine at the Alfred Medical Research and Education Precinct (AMREP) in Melbourne.
Course structure
Part A. Occupational and environmental health studies48 credit points
Note: You must achieve a minimum mark of 70% in MPH5040 and MPH5041 if you wish to progress into the research pathway. If you do not achieve the required minimum marks you will be automatically moved to the coursework pathway.
- MPH5040Introductory epidemiologyNo reviews yet6 cp
- MPH5041Introductory biostatisticsNo reviews yet6 cp
- MPH5203Environmental influences on healthNo reviews yet6 cp
- MPH5222Assessment and control of workplace hazardsNo reviews yet6 cp
- MPH5241Introduction to occupational health and safetyNo reviews yet6 cp
- MPH5242Psychosocial work environmentNo reviews yet6 cp
- MPH5243Chemical and biological hazardsNo reviews yet6 cp
- MPH5244Humans, work and physical hazardsNo reviews yet6 cp
Part B. Advanced application studies24 credit points
Research pathway
24 credit pointsNote: You must successfully complete MPH5213 prior to MAP5010.
Coursework pathway
24 credit pointsElective units
18 credit pointsThe handbook's description of this structure
The course is structured in two parts: Part A. Occupational and environmental health studies and Part B. Advanced applied studies.
Part A. Occupational and environmental health studies
In these studies, you will gain an introduction to occupational health and safety, epidemiology, biostatistics as applied to public health and management studies and the principles and practice of ergonomics. You will learn about the effects and human costs of occupational disease and injury and how to recognise, evaluate and control workplace hazards drawing on an understanding of the psychosocial effects of the work environment.
Part B. Advanced application studies
The focus of these studies is in professional or scholarly work that can contribute to a portfolio of professional development. You have two options:
- a research pathway where you will gain the practical skills required to formulate a research question and design and assess a research project. If you wish to use this master's course as a pathway to a higher degree by research you should take this option.
- a coursework pathway where you select elective units to suit your own interests.
Course progression map
The course progression map provides guidance on unit enrolment for each semester of study.
The course comprises 72 points structured into two parts: Part A. Occupational and environmental health studies (48 points) and Part B. Advanced application studies (24 points).
Units are 6 points unless otherwise stated.
PART A. Occupational and environmental health studies (48 points)
You must complete:
- MPH5241 Introduction to occupational health and safety
- MPH5243 Chemical and biological hazards
- MPH5222 Assessment and control of workplace hazards
- MPH5244 Humans, work and physical hazards
- MPH5040 Introductory epidemiology
- MPH5242 Psychosocial work environment
- MPH5203 Environmental influences on health
- MPH5041 Introductory biostatistics
You must achieve a minimum mark of 70% in MPH5040 and MPH5041 if you wish to progress into the research pathway. If you do not achieve the required minimum marks you will be automatically moved to the coursework pathway.
PART B. Advanced application studies (24 points)
You must complete either a. a research pathway or b. a coursework pathway:
a. Research pathway
You must complete:
- MPH5213 Research Methods
- MAP5010 Advanced health practice research project (12 points)
- MPH5276 Safety management systems
NOTE: You must successfully complete MPH5213 prior to MAP5010.
b. Coursework pathway
You must complete:
- MPH5276 Safety management systems
- 18 points from the elective list below.
Elective list
- MPH5213 Research methods
- MPH5215 Qualitative research methods
- MPH5256 Injury epidemiology and prevention
- MPH5042 Climate change and public health
- BTF5910 Corporate sustainability regulation
- any approved postgraduate unit offered by the School of Public Health and Preventive Medicine except the following units: MPH5020, MPH5301-5320 and EPM5001-5032.
Learning outcomes
These course outcomes are aligned with the Australian Qualifications Framework and Monash Graduate Attributes.
Upon successful completion of this course it is expected that you will be able to:
- 1
demonstrate an understanding of the legal and ethical framework which governs occupational health and safety practice and the obligations of industry in regard to the environment
- 2
access, critically appraise and integrate hazard information from published studies and other relevant sources in the literature to demonstrate autonomy, expert judgement and responsibility in an occupational and environmental health professional and/or management role
- 3
recognise, evaluate the level of exposure and assess the degree of risk to health from chemical, physical and biological workplace and environmental hazards and provide advice on appropriate control measures in the workplace and the community
- 4
demonstrate an understanding of the factors underlying risk perception and be able to effectively and sensitively communicate, in both written and oral forms, these risks to exposed people in the workplace and the community
- 5
identify, recommend and source or provide occupational health services, including preventative and rehabilitation programs and environmental advice to industry
- 6
demonstrate an understanding of epidemiological and biostatistical techniques and apply and interpret the knowledge to investigate health effects from occupational and environmental hazards.
- 7
Research knowledge and apply theories and research methods to a variety of occupational and environmental health problems and evaluate how they impact on health status and inform professional practice
Entry requirements
English language
Monash Level A, that is: IELTS (Academic): 6.5 overall (no band lower than 6.0); or Pearson Test of English (Academic): score of 58 overall with no band lower than 50; or TOEFL Internet-based test: score of 79 overall with minimum scores: Writing: 21, Listening: 12, Reading: 13 and Speaking: 18; or Equivalent approved English test
More information
Progression to further studies
Successful completion of this course may provide a pathway to a graduate research degree for students completing the research pathway.
Professional accreditation
This course is accredited by the Australian OHS Education Accreditation Board (AOHSEAB).
Notes for students
Semester 2 commencement is available for part-time study only.
Other information
This course equips workplace professionals with the skills and knowledge in quality-level occupational health and safety services in order to identify, prevent and manage occupational and environmental health risks and related health problems. You will learn to systematically control related hazards and exposures within a broad range of workplace and community environments. The course aims to enable you to take responsibility for high-level independent judgements and initiate, implement and evaluate risk management interventions within varied occupational and environmental contexts. It is particularly suitable for medical practitioners, nurses, allied health personnel, scientists and occupational health and safety managers. The course is offered by off-campus learning, however compulsory block attendance is required each semester.
IMPORTANT: This course is only available to international students in ‘on-campus’ mode. Please note that ‘on-campus’ mode comprises a mix of online learning and on-site teaching.
For most units, the majority of contact hours are facilitated through the University’s online learning platform, with additional face-to-face contact during designated study days at Public Health & Preventive Medicine at the Alfred Medical Research and Education Precinct (AMREP) in Melbourne.
Contacts
- Academic Coordinator
- Professor Karen Walker-Bone
- Dr Ewan MacFarlane
Common questions
How long is Master of Occupational and Environmental Health?
1.5 years full time, 72 credit points. At 24 credit points a semester, that is 3 semesters of full-time study.
Where can I study Master of Occupational and Environmental Health?
At Alfred Hospital.
How do I plan my Master of Occupational and Environmental Health units?
Open the course in the MonMap planner. It lays out your semesters, checks prerequisites as you drag units in, and tracks the credit points each requirement still needs.
Course details
- Qualification
- Master's Degree (Coursework)
- AQF level
- Level 9
- Credit points
- 72
- Full time
- 1.5 Years
- Part time
- 3 Years
- Maximum time
- 5 years
- Faculty
- Faculty of Medicine, Nursing and Health Sciences
- CRICOS code
- 028957E
- Abbreviation
- MOccEnvHlth
- Award title
- Master of Occupational and Environmental Health