MMA2004 Dynamics 1
Faculty of Engineering
MMA2004 Dynamics 1 is a level 2, 6-credit-point, undergraduate unit from the Faculty of Engineering, offered in 2026 in Semester 2 at Clayton and Malaysia. It needs ENG1005 and unlocks 5 units, leading on to 9 units in all.
- Credit points
- 6
- Offered in 2026
- Semester 2
- Clayton, Malaysia
- Assessment
- Exam 50%
- and 3 other tasks
- Workload
- 144 hours
- per semester
This is the 2026 handbook entry. See the 2027 entry.
Reviews
No reviews yetNo reviews yet. Be the first to review MMA2004.
Requisites
Before MMA2004
Prerequisites
Pass these before you enrol.
Prohibitions
You can't enrol if you have passed any of these.
After MMA2004
5 units list MMA2004 as a prerequisite or corequisite.
Enrolment rules
E6011 Master of Professional Engineering - You are exempt from the prerequisite rule if you are enrolled in this course.
Equivalent units
The same content under another code. Only one of them counts.
Overview
This unit introduces the fundamental principles of kinematics and kinetics as applied to particles and rigid bodies. You will explore concepts of displacement, velocity, and acceleration in rectilinear, curvilinear, and projectile motion, and develop the ability to formulate equations of motion in different coordinate systems.
Through analysis of forces and motion in planar mechanisms, you will apply kinematic and kinetic principles to understand the behaviour of translating and rotating bodies. The unit also extends these concepts to the principles of work, energy, impulse and momentum, and provides an introduction to the mechanical vibration of dynamic systems.
Offerings in 2026
| Teaching period | Campus | Mode |
|---|---|---|
| Second semester | Clayton | Flexible |
| Second semester | Malaysia | On campus |
Assessment
- In-class test 1Quiz / Test25%
- In-class test 2Quiz / Test25%
- Management portfolioPortfolioCompetency hurdle-
- Final assessmentExamination50%
Assessment details may change. Please refer to the assessment information in Moodle closer to the start of the teaching period.
Learning outcomes
When you finish this unit, you should be able to:
- 1
Determine the motion of particles and rigid bodies in translating and rotating systems by applying the principles of work, energy, impulse, and momentum.
- 2
Analyse forces and motion in planar mechanisms by applying kinematic and kinetic principles.
- 3
Apply project management principles to plan, monitor, and reflect on time utilised throughout the semester to support effective study practices and continuous improvement.
Workload and teaching
- Practical activities24 hours
- Workshops24 hours
- Teaching approachActive learning
The minimum total expected workload to achieve the learning outcomes for this unit is 144 hours per semester, typically comprising a mixture of 3-6 hours of scheduled learning activities and 6-9 hours of independent study per week. Scheduled activities may include a combination of teacher-directed learning, peer-directed learning, and online engagement. Independent study may
include associated readings, assessment, and preparation for scheduled activities.
You will actively engage in applying your knowledge, skills, and attributes in interactive, collaborative, and reflective activities.
Learning resources
Required resources
Textbook: Engineering mechanics: Dynamics (15th Edition, SI Units), Russell Hibbeler, Publisher: Pearson
Where it fits
MMA2004 is part of 3 areas of study in the 2026 handbook.
- AEROENG04Part C. Aerospace engineering knowledge and applicationAerospace engineeringNo reviews yet
- MECHENG03Part C. Mechanical engineering knowledge and applicationMechanical engineeringNo reviews yet
- ROBMCTRN04Part C. Robotics and mechatronics engineering knowledge and applicationRobotics and mechatronics engineeringNo reviews yet
Contacts
- Unit Coordinators
- Associate Professor Darwin Gouwanda
- Dr Olivia Kendall
- Chief Examiners
- Dr Olivia Kendall
Common questions
What are the prerequisites for MMA2004?
You need ENG1005 before you enrol. Enrolment rules also apply.
What can I take after MMA2004?
MMA2004 is a prerequisite or corequisite for 5 units, including MAE3002, MAE4416, MEC3453, MEC4101 and TRC3200. Those lead on to 9 units in all.
When is MMA2004 offered?
In 2026, MMA2004 runs in Semester 2 at Clayton and Malaysia.
How much work is MMA2004?
The handbook expects about 144 hours of study across the semester. No students have rated its difficulty yet.
Does MMA2004 have an exam?
Yes. The exam is worth 50% of the final mark, alongside 3 other tasks.
Which majors and minors include MMA2004?
MMA2004 is part of Aerospace engineering; Mechanical engineering; and Robotics and mechatronics engineering.
More details
- Credit points
- 6
- Level
- 2
- Study level
- Undergraduate
- Faculty
- Faculty of Engineering
- Organisational unit
- Department of Mechanical and Aerospace Engineering
- Type
- Coursework
- EFTSL
- 0.125
- Student contribution
- SCA Band 2
- Study abroad
- Available
- Handbook years
- 20262027