F2010 Bachelor of Design

The course develops through theme studies in history and theory, a drawing foundation, design studios specific to each of the specialist areas of study, and a range of self-selected elective units. These will come together in the form of a graduand exhibition developed during the final two studio units in the third year of the course.

Part A. History and theory studies

History and theory units will equip you with the skills necessary to research design issues that enable you to contextualise your own thinking and making in relation to the broader spectrum of global practices. These units will develop your ability to communicate ideas and strategies. Through the duel lens of historic and contemporary practice, you will begin to situate the place of design in society by referencing pivotal art, design and architecture movements. Later units address issues of culture, society and responsible design practices.

Part B. Drawing foundation

This will assist you to develop the practical and intellectual skills required by art, design and architecture students in the discipline of drawing.

Part C. Design studios

This is the component of the course through which you will develop key skills and concepts particular to your design discipline.

The collaborative design specialist area of study permits you to take studio units from the Communication, Industrial and Spatial design specialist areas of study within the first 2 years of the degree. You will complete the specialist area of study with two bespoke Collaborative design studio units in the final year of the degree. These units will bring together the unique insights you have gained from your previous interdisciplinary studio experiences. They will permit you to engage and intersect your collective skills to face design challenges that require the full breadth of design tools and experiences. You will develop independent conceptual and practical design skills alongside an ability to engage in collaborative design processes that build on your multidisciplinary design competencies.

In the communication design studio units you will undertake an exploration of traditional and emergent media and communication processes. You will learn to engage with and manipulate core design elements including typography, imagery, two and three-dimensional artifacts, interactivity, sound and motion, as key components to communication design solutions. Studio-based projects across both print and digital media platforms will develop skills in narrative story-telling, visible language, image construction and manipulation, interactive communication processes, production methods and technologies, and the planning and management of design outcomes.

In the industrial design studio units you will undertake a focused exploration of the range of issues, skills and techniques vital to the realisation of user-centred design. Through industrial design projects, you will learn about topics such as visualisation techniques, ergonomics, materials, production methods and technologies.

The spatial design studio units provide the opportunity to experiment with creative ideas while gaining an advanced understanding of the principles of spatial design. You will learn to translate your 2 dimensional concepts into 3 dimensional installations. Studio projects range from real client briefs involving cultural, commercial and community organisations to more speculative briefs that explore the opportunities and challenges of a continually transforming contemporary society. Through the sequence of studio units you will learn to create unique spaces and also how to adapt existing spaces to reflect your design ideas.

Part D. Occupational health and safety study

This will introduce you to occupational health, safety and environmental training particularly within the context of studying art, design and architecture.

Part E. Free elective study

Electives will enable you to further develop your knowledge of design, or to select units from across the faculty or the University (in which you are eligible to enrol).

Course progression map

The course progression map provides guidance on unit enrolment for each semester of study.

The course comprises 144 points, of which 96 points are focussed on the study of design and 48 points are free electives.

The course develops through theme studies in: A. History and theory studies (30 points), B. Drawing foundation (6 points), and C. Design studios (60 points) specific to each of the specialist areas of study, Part D. Occupational health and safety study (0 points), and Part E. Free elective study (48 points).

Elective units may be at any level, however, no more than 10 units (60 points) are to be completed at level 1 in the design course.

Units are 6 points unless otherwise stated.

Part A. History and theory studies (30 points)

You must complete:

• AHT1101 Introduction to the history and theory of art, design and architecture
• TDN1002 Design and the avant-garde
• TDN2001 Sociologies of design
• TDN3001 Research for design
• TDN3002 Design strategy and professional practice

Part B. Drawing foundation (6 points)

You must complete:

• DWG1201 Drawing 1

Part C. Design studios (60 points)

You must complete:

• COL1001 Collaborative design studio 1 (12 points)

Communication design

You must complete:

• CDS1002 Communication design studio 2 (12 points)
• CDS2001 Communication design studio 3 (12 points)
• CDS3001 Communication design studio 4 (12 points)
• CDS3002 Communication design studio 5 (12 points)

The Communication design specialist area of study requires you to complete a minimum of 36 points from the communication design studio units. Communication design studios 4 and 5 must be completed for this specialist area of study. A total maximum of 24 points can be taken in units at level 1. 

Industrial design

You must complete:

• IDN1002 Industrial design studio 2 (12 points)
• IDN2001 Industrial design studio 3 (12 points)
• IDN3001 Industrial design studio 4 (12 points)
• IDN3002 Industrial design studio 5 (12 points)

The Industrial design specialist area of study requires you to complete a minimum of 36 points from the industrial design studio units. Industrial design studios 4 and 5 must be completed for this specialist area of study.
A total maximum of 24 points can be taken in units at level 1.  

Spatial design

You must complete:

• SDN1002 Spatial design studio 2 (12 points)
• SDN2001 Spatial design studio 3 (12 points)
• SDN3001 Spatial design studio 4 (12 points)
• SDN3002 Spatial design studio 5 (12 points)

The Spatial design specialist area of study requires you to complete a minimum of 36 points from the spatial design studio units. Spatial design studios 4 and 5 must be completed for this specialist area of study. A total maximum of 24 points can be taken in units at level 1.

Collaborative design

You must complete:

• Communication, or Industrial, or Spatial design studio (2 x 12 points)
• COL3001 Collaborative design studio 4 (12 points)
• COL3002 Collaborative design studio 5 (12 points)

In the Collaborative design specialist area of study, you will take some studio units from across Communication, Industrial and Spatial design.  You will apply the range of combination of skills you have developed through collaborative design approaches to relevant projects.  If you undertake this path you must complete Collaborative design studio 4 and 5.
Please note, some units may require unit coordinator approval, prerequisite or corequisite studies. A total maximum of 24 points can be taken in units at level 1.

Part D. Occupational health and safety study (0 points)

You must complete:

• OHS1000 Introduction to art and design health and safety

Part E. Free elective study (48 points)

Elective units may be chosen from units available in the Bachelor of Design course. Elective units may also be used to sample from across the faculty and University or to complete a major or minor(s) from another course as long as you have the prerequisites and there are no restrictions on enrolment in the units.

Free electives can be identified using the [[http://www.monash.edu.au/pubs/handbooks/units/search][browse units]] tool and [[http://www.monash.edu.au/pubs/handbooks/units/][indexes of units]] in the current edition of the Handbook. [[http://www.monash.edu.au/pubs/handbooks/aos/index-bydomain_type-major.html][Majors]] and [[http://www.monash.edu.au/pubs/handbooks/aos/index-bydomain_type-minor.html][minors]] can also be identified using the Handbook indexes. The level of the unit is indicated by the first number in the unit code; undergraduate units are those that commence with the numbers 1-3. You may need permission from the owning faculty to enrol in some units taught by other faculties.

If you are in a double degree course, some units required for the other degree are credited as electives for the design degrees.